Skip to main content Skip to search Skip to main navigation
+49(0)771/17513169
About us
Contact us

Contact sensor in housing with measuring transducer 0 - 10 V and 4 - 20 mA output

Product information "Contact sensor in housing with measuring transducer 0 - 10 V and 4 - 20 mA output"

Pipe contact sensor active in plastic housing with selectable output. The sensor is used for temperature measurement on pipes and can also be used outdoors. The sensor is located in an impact-resistant and moisture-proof plastic housing. The aluminum block enables good temperature transmission and contains a bushing for cable ties or tensioning straps to attach the sensor. The output can be selected directly on the circuit board (0V-10V or 4 -20mA) thanks to the built-in measuring transducer. Furthermore, you can choose between four different temperature ranges via a DIP switch (- 50 °C ... + 50 °C; 0 °C ... + 50 °C; 0 °C ... + 100°; 0 °C ... + 160 °C). This sensor is also available here in the store with a passive sensor.
Output: Ausgang aktiv

Technical specifications

Item numberTA-GRA
SensorPT1000 Class B
DINDIN EN 60751
Temp.Coefficient(Sensor)3850 ppm/K
Measuring current1.0 - 3.0 mA
Error limitdT = +/- (0.30°C + 0.005 x T)
Circuit type 3 - Leiter
Operating temperature- 50 °C ... + 100 °C
Housing dimensions66 x 60 x 39 mm
Housing materialPolyamide (white)
Protection classIP65
Mooring block12 mm x 50 mm made of aluminum
Connection terminals
Cable bushing

Technical specifications transmitter 

Output
Supply voltage24 VDC
Current absorptionmax. 4 mA
Transmission behaviorlinear over the entire measuring range
Transmission accuracy> 0.2 K + max. 1% v. E., typ. max. 0.7 K (bei 25 °C)
Temperature ranges-50 °C ... + 50 °C; 0 °C ... + 50 °C; 0 °C ... +100°; 0 °C ... + 160°C (set via DIP switch, see circuit in data sheet)
Temperature coefficient
Connectionssee data sheet
  • Heating technology
  • Building automation
  • Air conditioning and ventilation systems
  • Cooling systems
  • Storage rooms
  • Plant engineering


  • Pipe contact sensor active in the housing
  • individually packed

General information

If you cannot find a suitable product for your application in the field of temperature measurement technology in our store, please do not hesitate to contact us. We also offer on request:

  • 3 - or 4-wire circuits
  • Special sensors
  • Different sleeve diameters and sleeve lengths
  • higher temperature ranges
  • Special cables

Custom-made products are usually possible from small quantities. 

Note for corporate customers: Ask us for price and delivery conditions.