Immersion sleeve brass G1/2" nickel-plated Length selectable
Immersion sleeve brass G1/2" nickel-plated Length selectable
€10.01
Available, delivery time: 1-3 days
Product number:
TM-100
Product information "Immersion sleeve brass G1/2" nickel-plated Length selectable"
Universal immersion sleeve made of brass for all standard cable sensors with a protective sleeve of max. 6 mm. The immersion sleeve enables good thermal contact with the medium to be measured and allows a defective sensor to be replaced without having to interrupt the closed circuit. The thermowell is nickel-plated and can be used up to 150°C. We also offer stainless steel thermowells if you need to measure up to 600°C or in aggressive media. Of course, you can also find suitable temperature sensors in our store. We are also happy to answer any questions you may have by telephone.
The immersion sleeve is attached using the G1/2" thread, the temperature sensor is simply fixed in place using the locking screw.
| Item number | TM- |
| Material | Brass |
| Coating | nickel-plated |
| Installation length | see selection list above (100 mm, 150 mm, 200 mm, 250 mm, 300 mm) |
| Thread | G1/2" DIN EN 228-1 |
| Width across flats | SW 22 |
| Cable fixing | Locking screw M4 |
| Temperature range | max. 150°C |
| Print area | max. 5 bar |
- Thermowell
Areas of application
- Heaters and heating controls
- Spare part in exchange
- Air conditioning and ventilation systems
- for all types of cable sensors (buffer sensors, storage tank sensors, immersion sensors, etc.)
General information
If you cannot find a suitable product for your application in the field of temperature measurement technology in our store, please do not hesitate to contact us. We also offer on request:
- 3 - or 4-wire circuits
- Special sensors
- Different sleeve diameters and sleeve lengths
- higher temperature ranges
- Special cables
Custom-made products are usually possible from small quantities.
Note for corporate customers: Please contact us for price and delivery conditions.